42U network rack, Dynamic Basic 2040x800x800 mm, color grey (RAL 7035)

The DIGITUS® Dynamic Basic Series is made for high demand IT-Infrastructure Solutions - designed and developed on highest standard in Germany

• Tavan fan üniteleri için hazırlanmıştır
• Ön kapakta kilitlenebilir döner kollu sap

The Racks of the Dynamic Basic Series were designed for the user friendly installation of active- and passive network components accompanied by a neat cable management. Each rack consists of up to 1.5 mm strong steel sheet material which ensures a very good stability as a robust steel construction due to special plate curving technique. The color is created by powder coating in grey (RAL 7035) and black (RAL 9005). For certain conditions, where the set-up location is difficult to reach, the rack can be disassembled. Doors can be easily detached and the door stop can be changed from right to left. Furthermore the roof is ready for the mounting of an air ventilation unit. Each rack contains 2 pairs (4 pieces) of 483 mm (19”) profile rails inside which are galvanized and with height unit marking (countable from both directions). They are variable in depth and connected with additional depth support bars to realize extensive 483 mm (19”) equipment installations. An important aspect for each installation is the cable management. The base of each rack is equipped with a punched out cable entry covered with a metal plate, whereas the base of 800 mm width racks gets extended with additional punched out cable entries with plastic covers left and right. These are also placed in the roof (1x for 600 mm width cabinets, 3x for cabinets from 800 mm width. An extensive portfolio of accessories for cable management, shelves, etc. will help to meet many requirements in daily use.

Technische Details

• IP20 güvenlik sınıfı
• Ön kapıda 1 noktalı kilit mekanizması
• Kabinin altına daha önce takılmış 4 adet ayar ayağı da dahildir
• Kabinin ön ve arka iç tarafında monte edilmiş 483 mm (19“) profil rayları, galvanize
• 483 mm (19“) profil rayları ünite derinlik ve yükseklik işaretleriyle ayarlanabilir
• 1,5 mm kalınlıkta çelik sac
• Özel sac bükme teknolojisi sayesinde yüksek çerçeve sertliği
• Çatı kısmı fan elemanını taşıyacak şekilde hazırlanmıştır (yuvalar açılmıştır)
• Monte edilecek komponentler için kabin içerisinde çeşitli topraklama noktaları
• Çatı kısmı fan elemanını taşıyacak şekilde hazırlanmıştır (yuvalar açılmıştır)
• Tüm montajı tamamlanmış halde teslim edilir
• IP protection class: IP20
• Renk: açık gri, RAL 7035
• Derinlik: 800 mm
• Ön kapı: Cam kapı
• U: 42
• Taşıma kapasitesi: 600 kg
• Mounted: yes
• Rear door: Steel door, closed, single opening
• Side panels: Both sides
• Kabin tipi: Ağ kabini
• Genişlik: 800 mm

Lieferumfang

• Earthing wire set
• Installation set (screws, cage nuts, washers)